Titleist T100 vs T150 vs T200 vs T350: Loft Specs Compared
If you’re choosing between these four Titleist T‑Series irons, the 7‑iron loft tells you most of what you need to know.
- T100 (34°) – tour blade benchmark for skilled ball‑strikers.
- T150 (32°) – 2° stronger, faster face, still a compact players shape.
- T200 (30.5°) – polymer‑core construction with a players look but more forgiveness.
- T350 (29°) – strongest loft, maximum game‑improvement help.
Next useful action: Match your handicap to the model (see table below), then verify your current 7‑iron distance to confirm the loft gap works for your set.
Specs Table – 7‑Iron Comparison
| Model | 7‑Iron Loft | Key Technology | Typical Handicap Fit |
|---|---|---|---|
| T100 | 34° | Forged blade, minimal offset, pure feel | < 8 |
| T150 | 32° | Thinner face, same compact shape as T100 | < 8 or 8–14 |
| T200 | 30.5° | Polymer core inside hollow body, moderate offset | 8–14 |
| T350 | 29° | High‑MOI, max offset, wide sole | 15+ |
Note: Lie angle, shaft length, and offset vary by model and are listed in Titleist’s standard specs. Adjustments (e.g., 2° upright) are available through custom fitting. Loft‑for‑loft, the T350 launches highest and spins least, while the T100 maintains a lower, more controlled flight.
When the Loft Answer Changes (Applicability Boundary)
The 7‑iron loft comparison above applies only when you compare standard, off‑the‑shelf specs. If you order a custom set with different lofts (e.g., T100 bent 1° weak or T350 bent 1° strong), the gapping and performance shift significantly. For example, a T150 bent to 31° flies nearly the same as a T100 bent to 32° – the distance gap between models shinks. Also, if you intend to mix models in a blended set, the standard 7‑iron lofts are just the starting point; you must verify gaps across the whole bag, not just one club. The handicap fit guidelines also change when a player swings unusually fast or slow – a 10‑handicap with 105‑mph driver speed may fit T150, while the same handicap with 85‑mph speed fits T200 or T350.
What the Specs Mean for Your Next Choice
If you currently play a 7‑iron that carries 150 yards, switching from T100 to T350 adds roughly 5–7 yards due to the 5° stronger loft and faster face technology. That can close a distance gap in your longer irons or force you to re‑gap your wedges. Practical implication: If you are happy with your current 7‑iron carry distance and only want a more forgiving head, stay with the same loft group (T100 → T150, T200 → T350). If you want an extra club‑length of long‑iron distance, move one step stronger in loft (T100 → T150 or T200 → T350) and adjust your set makeup accordingly. Do not assume “stronger loft = always better” – the launch angle drops and spin decreases, which can make greens hold less on soft approach shots.
How to Verify Fit on Your Actual Clubs
Before buying, take your current 7‑iron to a launch monitor and measure your carry distance and peak height. Then find a demo of the model you’re considering and compare the same metrics. A simple verification step: hit five 7‑iron shots with each club on the same launch monitor, keeping swing speed within 1 mph. If the carry difference is more than 8 yards, the gapping may create a problematic hole in your set – you may need to blend or bend lofts to fix it. Titleist fitters can also use a lie angle gauge to confirm your strike pattern matches the model’s offset and sole grind.
Realistic Mismatches and Trade‑Offs
Mixing a T350 7‑iron (29°) with a T100 8‑iron (38°) creates a 9° loft gap – roughly 12–15 yards of carry difference, which leaves a scoring hole in the middle of your bag. This is a common mistake high‑handicap players make when they switch to a stronger‑lofted long iron without adjusting the rest of the set. Consequence: you will face awkward yardages between 135 and 150 that require partial swings or a club change. Another mismatch: a player with a steep attack angle (digger) using the T350’s wide sole may see turf interaction that causes heavy contact, while the same swing works well with the T200’s narrower sole. There is no one‑size‑fits‑all – you must test on real turf, not just mats.
Key Takeaways
- The 5° loft spread from T100 (34°) to T350 (29°) means the T350 7‑iron flies roughly one club longer than the T100 7‑iron at the same swing speed.
- T150 vs. T100: only 2° difference, but the T150’s faster face can add 2–3 mph ball speed for mid‑handicap players without changing the look.
- T200 is the crossover: it shares the T100/T150 silhouette but uses a polymer core for stability. 30.5° loft keeps gapping tight when mixing sets (e.g., T200 5–6 iron, T150 7–P).
- Don’t assume lower handicap = lower loft: many low‑handicap players prefer the T150 over T100 because the extra 2° of carry distance still holds greens.
- Fitting matters: off‑the‑shelf lofts are only a starting point. Verify lie and length with a fitter, especially if you switch between T100 and T200.
FAQ
What is the loft difference between the T100 and T150 7-iron?
The T150 7-iron is 2° stronger (32°) than the T100 7-iron (34°).
Which Titleist T‑Series iron is most forgiving?
The T350 has the highest MOI, widest sole, and most offset, making it the most forgiving in the line.
Should I play the T200 or T350?
If you are a 15+ handicap or need maximum help on mishits, choose the T350. For an 8–14 handicap who wants a players look with extra stability, the T200 is the better fit.
Can I mix T100, T150, T200, and T350 in the same set?
Yes, Titleist encourages blended sets. Common combos: T350 long irons (4–6), T200 mid‑irons (7–8), and T100 short irons (9‑PW). Loft gapping is consistent across the series when you order standard specs.
Do the standard lofts change if I custom order 1° strong or weak?
Yes, Titleist offers ±2° loft adjustments on all T‑Series irons. Verify your desired final lofts with a certified fitter to ensure the actual carry distances align with your set gaps. Varies by region; check local Titleist dealer for availability.
How do I confirm the lie angle is correct for my swing?
Book a custom fitting session; a fitter will use impact tape or a lie board to check whether the sole contacts the turf in the center. This step prevents directional misses, especially with the wider‑sole T350.
Michael Reeves is a PGA Professional with over 20 years of experience in competitive golf and instruction. A former Division I collegiate player at the University of Texas, he competed on the mini-tours before transitioning to full-time coaching and golf journalism. He has been a certified PGA teaching professional since 2005 and has worked with players at every level, from absolute beginners to collegiate champions.
His writing has appeared in Golf Digest, Golf Magazine, and The Left Rough. At GolfHubz, Michael leads the editorial team, overseeing fact-checking and ensuring every answer meets the same standard he demands on the lesson tee: clear, evidence-based, and immediately useful.
When he’s not writing or teaching, Michael plays to a +1.4 handicap at his home club in Austin, Texas. He has attended over 40 major championships as a journalist and fan, and has played more than 200 courses across 15 countries.
You can reach Michael at [email protected] or follow his occasional swing analysis posts on the site.