Golf Iron Lie Angle Chart: Standard Specs for Every Brand
The table below gives factory-standard 7-iron lie angles for major brands. Use it as a baseline when comparing clubs or evaluating a used set. For a precise fit, work with a professional who can measure your swing dynamics on a lie board.
Before you use this chart:
– Confirm your iron’s exact model and year – manufacturers sometimes change specs between generations.
– If you have Ping irons, check the colored dot on the hosel and use the Ping color-code table below.
– When shopping used irons, ask the seller for the lie angle or model year. If they don’t know, assume factory spec is a starting point only.
Specs / Reference Table
| Brand | Standard Lie Angle (7-iron) | Notes |
|---|---|---|
| TaylorMade | 62.5° | Common across recent P-series, Stealth, and SIM lines |
| Callaway | 62.25° | Typical for Apex, Rogue, Paradym, and previous models |
| Titleist | 63° | T-Series, previous models (e.g., AP2, 620 CB) |
| Ping | 62° (Black dot) | Black dot = standard. See color-code table below |
| Mizuno | 62° | JPX, Pro series (e.g., JPX 923, MP-20) |
| Cobra | 63.5° | RadSpeed, King, LTDx, Aerojet lines |
| Srixon | 62° | Z-Series, Q-Star, and ZX lines |
| PXG | 62° | 0211, Gen5, Gen6, etc. |
These are standard-length, off-the-rack 7-iron specs. Always verify with your specific model and year. Lie angles can shift slightly between production runs, and older models may not match current specs.
Ping Color-Code System
Ping uses a colored dot on the hosel to indicate lie angle adjustments from the standard Black dot (62°). The dot is stamped on the hosel – clean the area with a cloth to see it clearly.
| Dot Color | Adjustment from Standard (7-iron) |
|---|---|
| Black | Standard (62°) |
| Blue | +0.75° upright |
| Yellow | +1.5° upright |
| Green | +2.25° upright |
| White | +3° upright |
| Silver | +3.75° upright |
| Maroon | +4.5° upright |
| Red | –0.75° flat |
| Orange | –1.5° flat |
| Brown | –2.25° flat |
| Gold | –3° flat |
To find your actual lie angle: start at 62° and add or subtract the adjustment above. For example, a Green dot 7-iron has a lie angle of 62° + 2.25° = 64.25°.
Ping continues to use this same color-code chart for all current iron models. Used Ping irons may have a different dot color than the current standard – check the hosel to confirm.
Why Lie Angle Matters
- 1° lie angle error ≈ 4 yards offline at 150 yards. That is a real difference – enough to turn a green-finder into a fringe miss. If you hit a 150-yard shot at a target, a 1° error moves the ball roughly 4 yards left or right.
- Brands do not share the same “standard.” Cobra’s 63.5° is 1.5° upright compared to Mizuno’s 62°. Switching between brands without adjustment can cause consistent direction errors. For example, moving from Titleist (63°) to Cobra (63.5°) – a 0.5° difference – shifts ball flight ~2 yards offline at 150 yards. Small but noticeable for low handicaps.
- If you see consistent left or right misses with a straight swing path, check your lie angle first. A draw/hook bias often points to a lie that is too upright; a fade/slice bias (with no swing issue) may mean the lie is too flat. This is a starting point – hit off a lie board to confirm.
How to Check Your Current Lie Angle at Home
You can do a rough check without a lie board using impact tape or a dry-erase marker.
- Mark the face – Apply impact tape to the face or draw a vertical line with a dry-erase marker on the ball.
- Hit a few shots – Use a flat lie board or a piece of hardboard. After impact, look at where the tape/marker contacts the sole.
- Read the contact pattern:
- If the mark is centered on the sole, lie angle is close.
- If the mark is toward the toe (heel of the club sitting low), the lie is too upright.
- If the mark is toward the heel (toe sitting low), the lie is too flat.
Note: This method is a rough indicator. For precise measurement, use a lie board and a professional clubfitter.
Common Lie Angle Mistakes
- Assuming all clubs within a same brand set are identical. Two different model years from the same brand can have different lie angles. Also, lie angles can shift over time with impact – used clubs should be measured before assuming they are still at factory spec.
- Copying a friend’s setup. Lie angle depends on your height, wrist-to-floor measurement, and swing dynamics. What works for a taller player will likely be too upright for someone shorter.
- Ignoring lie angle in used clubs. A used set might have been bent by the previous owner. Always confirm before you buy.
- Bending cast irons at home. Most forged irons can be bent ±2° without risk. Cast irons (many game-improvement models) are harder to bend and can crack. Check with a clubfitter first. Bending may void warranty on some brands.
When to escalate: If impact marks on a lie board are consistently toe-up or heel-down even after adjusting your setup, see a professional fitter. Do not attempt to bend irons yourself without the proper tool and knowledge of the metal’s limits.
FAQ
Do all brands list their lie angles the same way?
No. Some publish exact degrees (e.g., TaylorMade 62.5°), while others only offer a range or a “standard” setting. Always check the spec sheet for your specific model year.
How do I find my iron’s lie angle if it’s not in the table?
Look up the manufacturer’s website for that model’s specs. Many online retailers also list “standard lie” in product details. If unavailable, contact customer support.
Should I get fitted for lie angle even if I’m a beginner?
Yes. A lie angle off by just 2° can cause consistent left/right misses that mask other swing issues. A basic fitting is inexpensive and improves accuracy immediately.
Can lie angles be bent after purchase?
Most forged irons can be bent ±2° without risk. Cast irons (many game-improvement models) are harder to bend – check with a clubfitter first. Bending may void warranty on some brands.
What about lie angles for short irons and wedges?
Lie angles become progressively flatter as the club gets shorter (and more upright as it gets longer). The 7-iron spec is the common reference; full set specs are in the manufacturer’s official spec sheet.
Does Ping still use the color-dot system?
Yes, Ping continues to use the same color-code chart for all current irons. The dot is stamped on the hosel and is easy to see with a quick clean.
This chart serves as a quick reference when comparing irons or evaluating used clubs. For precise fitting, work with a professional who can measure your swing dynamics and adjust lie angles accordingly.
Michael Reeves is a PGA Professional with over 20 years of experience in competitive golf and instruction. A former Division I collegiate player at the University of Texas, he competed on the mini-tours before transitioning to full-time coaching and golf journalism. He has been a certified PGA teaching professional since 2005 and has worked with players at every level, from absolute beginners to collegiate champions.
His writing has appeared in Golf Digest, Golf Magazine, and The Left Rough. At GolfHubz, Michael leads the editorial team, overseeing fact-checking and ensuring every answer meets the same standard he demands on the lesson tee: clear, evidence-based, and immediately useful.
When he’s not writing or teaching, Michael plays to a +1.4 handicap at his home club in Austin, Texas. He has attended over 40 major championships as a journalist and fan, and has played more than 200 courses across 15 countries.
You can reach Michael at [email protected] or follow his occasional swing analysis posts on the site.